Wireless GO II

Wireless GO II

双通道无线话筒系统

世界上首个真正无线的最小话筒诞生了。Wireless GO II 是一款超紧凑、用途极广的无线话筒系统,由一个双通道接收器和两个发射器组成。发射器可作为夹式话筒,配有高品质的内置话筒,可实现完全无线操作,也可作为腰包与外部领夹一起使用,为任何形式的内容创作提供极度清晰的音效。

Wireless GO II 拥有一系列强大的功能,包括与摄像机、移动设备和电脑的通用兼容性、扩展范围(200 米视线)和已提高的传输稳定性、板载录制等诸多功能。这是新一代的无线音频。

主要功能:

  • 双通道无线话筒系统,可同时录制两个音源的声音
  • IV 系列 2.4GHz 数字传输,128 位加密——音频在高达 200 米的视线范围内依旧极度清晰,并通过优化实现了在密集的射频环境中的极度稳定操作
  • 3.5 毫米 TRS 模拟输出、USB-C 和 iOS 数字输出——通用兼容摄像机、移动设备和电脑
  • 板载录制——内部存储超过 24 小时
  • 分离或合并录制模式——分别录制每个通道,或将它们合在一起,以便在后期制作中获得最大的灵活性
  • 安全通道,三级增益控制(0 分贝、-12 分贝、-24 分贝——可扩展到 10 级)
  • 内置可充电锂离子电池——电池续航长达 7 小时
  • 设计和制造于澳大利亚悉尼的 RØDE 精密生产厂
学习如何使用 WIRELESS GO II


无与伦比的多功能

Wireless GO II 将无线多功能性提升到了新的高度。它配有一个 3.5 毫米 TRS 模拟输出,用于插入摄像机,以及通过 USB-C 的数字音频输出,用于插入智能手机、平板电脑和电脑,它是内容创作、电影制作、镜头或台上演示、录制视频博客、录制 YouTube 视频,以及直播等诸多活动的完美选择。

板载录制意味着您再也不用担心掉线或音频问题,而灵活的增益控制则可以让您精确地调整到您设备的输出。Wireless GO II 还提供了单独录制每个通道或将两个通道结合起来的选项,确保了后期制作的最大灵活性。

超紧凑的无线音频

Wireless GO II 提供了与最初的 Wireless GO 相同的口袋大小的外形。发射器和接收器的重量不到 32 克,几乎不占用摄像机包、背包、手提包或公文包的空间。它还配有一个方便的手提袋,以保持所有东西的整洁与安全。其独特的夹子设计让它可以非常快速和方便地夹在衣服上或安装在单反摄像机或无反光镜摄像机、移动摄像机支架、吊杆或冷靴附件上——超紧凑的无线音频,适用于任何录音情况。

专业声效。无缝连接

Wireless GO II 的设计旨在提供专业的声音,同时又非常简单易用。发射器和接收器自动配对,确保每次都能实现无缝设置。RØDE 的 IV 系列 2.4GHz 数字传输,采用 128 位加密技术,传输距离高达 200 米(视线),并经过优化,可在射频活动频繁的地区完美无瑕地运行,包括密集的城市环境、购物中心、大学、会议中心和办公室。

每个发射器都有一个高品质的内置全指向电容音头,用于完全无线录音,还有一个3.5 毫米 TRS 输入,用于插入领夹式话筒。Wireless GO II 还提供了扭锁式毛茸防风罩,以便在大风或恶劣天气条件下进行录音。在任何情况下都能获得极度清晰、专业的声音。


RØDE Central

使用 RØDE Central 解锁 Wireless GO II 的高级功能!这款简单易用的应用程序可让您设置设备偏好,查看、优化和导出录音,激活和停用功能,并更新您的固件。可免费下载 Mac 版和 Windows 版。

更多功能。更多的灵活性

将 Wireless GO II 与 RØDE Central 连接,可以启用一系列方便的功能,包括安全通道,在主音频剪辑时以 -20 分贝的速度记录第二条音轨;静音锁,让您不会意外地将发射器静音;颗粒增益控制模式,将三级衰减器变成了 10 级衰减器,以便将输出精确地调整到您的摄像机上;以及板载录制。它给我们带来了……

板载录制

每台 Wireless GO II 发射器都具备板载录制功能,内部存储器足以存储超过 24 小时的压缩音频和超过 6 小时的非压缩音频。激活后,一旦发射器连接到接收器,录音就会开始,因此您将始终有一个录音备份,以防您遇到掉线或其它音频问题。当您在 RØDE Central 中加载文件时,您甚至可以看到任何掉线的地方,这样您就可以准确地确定您需要的音频。欢迎使用无忧录音。

请注意,Wireless GO II 在美国无法同时进行板载录音和标准无线录音。



Box Contains

2 x Transmitters

2 x Transmitters

1 x Receiver

1 x Receiver

3 x Furry Windshields

3 x Furry Windshields

3 x SC20 USB-C to USB-A Cables

3 x SC20 USB-C to USB-A Cables

1 x SC5 TRS to TRS Memory Cable

1 x SC5 TRS to TRS Memory Cable

1 x Carry Pouch

1 x Carry Pouch


Downloads

Datasheet

Quick Start Guide


FAQs

Click below to find out more about this product.

Q.
Can I connect the Wireless GO II to devices with XLR inputs? 
A.

Yes. This is possible using the supplied SC5 cable or any other TRS to TRS cable and the VXLR Pro or VXLR+ adaptor to convert the signal. You can even use the SC11 splitter cable and two adaptors to break out the Wireless GO II's two channels onto separate output jacks for dual channel recording.  

A.

The Wireless GO II's windshields feature a twist-and-lock bayonet connector, which ensures an extremely strong connection. To attach them securely, align the two white dots on the windshield with the black dots on the receiver, then push the windshield down and twist to lock it in place. Reverse the process to remove them. 

A.

The Wireless GO II's fine gain control can be enabled/disabled via RØDE Central. To activate it, open RØDE Central, plug in the receiver, navigate to the settings page, and toggle the 'Gain Mode' button to 'Fine'. This will expand the Wireless GO II's three-stage pad to a 10-stage pad, which goes from 0dB to -30dB in 3dB increments. It also gives you access to an extra 6dB of gain reduction, which is useful if you have a particularly sensitive camera or recording device. Read more about the gain control at the Wireless GO II Learning Hub

A.

RØDE’s Series IV digital transmission delivers an increased range of 200m and improved transmission stability, particularly in environments with lots of RF activity (such as dense urban areas, shopping malls, universities and convention centres).

A.

The Wireless GO II transmitters are capable of recording over 24 hours of compressed audio or 7 hours of uncompressed audio each. Once storage on the device is full, the oldest saved recordings will be overwritten. Recordings can be accessed, optimised, exported, and deleted via RØDE Central. Find out more about on-board recording via the Wireless GO II Learning Hub

A.

No, the Wireless GO II is not currently compatible with the original Wireless GO.

A.

RØDE Central is a companion app for the Wireless GO II that allows you to control all of the functions of the transmitters and receiver, update firmware, and access features such as on-board recording, the fine gain control and safety channel. To download and find out more about RØDE Central, head to the Wireless GO II Learning Hub

A.

The Wireless GO II and original Wireless GO share the same compact form factor, unique cold shoe clip, in-built microphone, and easy-to-use design. However, the Wireless GO II is a dual channel wireless microphone system, which consists of two transmitters and a single receiver. It also offers an extensive feature set that make it extremely versatile, including both an analog 3.5mm TRS output for plugging into cameras and a digital audio output via USB for plugging into smartphones, tablets and computers, on-board recording, 200m range with improved transmission stability, flexible gain controls, safety channel, complete control over all features and functions via RØDE Central, and much more. 

A.

The Wireless GO II gives you the option to either record in 'Merged' or 'Split' mode (toggled by pressing and holding the pair and gain buttons on the receiver for three seconds or via RØDE Central). This allows you to record each transmitter onto separate channels on the output ('Split' mode) or combine the two into a single output ('Merged' mode). When it's in 'Split' mode, there will be two output level meters, when it's in 'Merged' mode, there will be just one. Read more about this at the Wireless GO II Learning Hub

A.

When activated, safety channel mode will record a second track of audio at -20dB as a backup in case your sound source gets loud unexpectedly and causes the main channel to distort. To enable safety channel mode, open the RØDE Central app, plug in the Wireless GO II receiver, navigate to the settings screen, and click the 'Safety Channel' toggle (note: this can only be activated in 'Merged' mode). Read more about the safety channel at the Wireless GO II Learning Hub

A.

The Wireless GO II features a digital audio output via USB-C, which allows you to record directly into any smartphone, tablet, or computer without the need for adaptors or other audio interfaces. The Wireless GO II comes with three USB-C to USB-A cables for charging and also connecting to computers with a USB-A input. To connect to a computer, Android smartphone or tablet, or any other device with a USB-C input, you will need a USB-C to USB-C cable, such as the RØDE SC16. To connect to an iOS device, such as an iPhone or iPad, you will need a Lightning Accessory Cable (USB-C to Lightning) cable, such as the RØDE SC15. The Wireless GO II is MFi-certified, meaning it will interact seamlessly with all iOS devices. 

A.

The Wireless GO II's on-board recording function is enabled and disabled via the RØDE Central app. To activate it, plug in the transmitter(s), navigate to the settings screen and toggle the 'Record' button to either 'Always' or 'Backup'. In 'Always' recording mode, the transmitter will start recording audio as soon as it is switched on and will continue recording until it is switched off, regardless of whether is it connected to the receiver. In 'Backup' recording mode, the transmitter will start recording audio when it connects to the receiver. When the receiver is switched off, the recording will stop.

When on-board recording is enabled, a red 'REC' icon will appear on that transmitter’s channel on the receiver. These recordings can be accessed, optimised, exported, and deleted via RØDE Central. Read more about on-board recording at the Wireless GO II Learning Hub.

A.

To connect the Wireless GO II to your iOS device, you need an MFi-certified 'Lightning Accessory Cable'. This is different to the ‘charge and sync’ cable that may have been included with your Apple device and other standard USB-C to Lightning cables. The RØDE SC15 is an MFi-certified Lightning Accessory Cable and is recommended for use with the Wireless GO II for best performance.  

A.

To reconnect a transmitter to the receiver, press and hold the pair button (‘∞‘) on the receiver for three seconds to enable pairing mode, then single-click the power button on the transmitter and wait a few seconds. Repeat this process to pair the second transmitter.